Message Playback - AT&T E1812B User Manual

Number of messages (or during
playback, message number cur-
rently playing).
PLAY/ to begin
STOP
or end message playback.
PLAY/
1.
"You have [xx] new
messages and [xx]
old messages"
Message playback begins.
See options at right.
2.
/STOP
PLAY
to end message playback.
NOTES:
1. If F is flashing in the mes-
sage window, memory
is full. You will have to
delete some messages
before new ones can be
received.
is 15 minutes.
3. If you receive calls when
the memory is full, the
telephone will ring 10
times, then answer and
announce "Memory is
full, enter remote access
code."
4. New (unheard) messages
cannot be deleted.
Answering system operation

Message playback

Press
system announces the number of messages, then
begins playback.
If you have new messages waiting, you will hear
only the new messages (oldest first). If there are
no new messages, the system will playback all
messages (oldest first).
Announcements
STOP
number of messages.
time it was received.
sages." If the system has less than five minutes
of recording time left, you will hear the time
remaining.
Options during playback
volume.
rently playing. Press twice to hear previous
message.
played back.
To delete all messages
To delete all old messages, press and hold
while the telephone is idle (not during a call, or
during message playback).
PLAY/ to listen to messages. The
STOP
VOLUME button to adjust the speaker
SKIP
REPEAT to repeat the message cur-
DELETE to delete the message being
/STOP to stop playback.
PLAY
37
"End of mes-
DELETE