Table of Contents
Advertisement
Special Setup
1. Select <Special>.
2. Select each item and set it properly.
• DIS : Automatically compensates for
the flicker on the screen.
DIS cannot be used if VA/MD and
tempering detection are used.
Digital zoom cannot be used if DIS is used.
• Day & night : You can switch the mode to adjust the black and white level as well
as the colors.
- Color : Always displays the video in colors.
- B/W : Always displays the video in black and white.
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
Auto daytime/nighttime mode setting cannot be selected if the AGC mode in the <Exposure>
menu is set to <Off> or <Manual>.
• Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
• Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
• Sharpness mode : Adjust the overall sharpness of the image.
If selecting <On>, you can adjust the sharpness of the image.
• Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
• Color level : Adjust the color level of the image.
English _81
Advertisement
Table of Contents
