Table of Contents
Advertisement
setup screen
WDR Setup
You can set to display a sharp image of the objects in a scene where both bright and dark
areas exist.
1. Select <Backlight>.
2. Set <Mode> to <WDR>.
3. Select each item and set it properly.
• WDR Level : Specify the WDR
sensitivity level.
M
If WDR mode is active, the shutter mode
cannot be changed. Data transfer via the
network is available at up to 15 fps.
If the WDR mode is active, a moving
object can cause an afterimage on the
screen.
Ex)
<WDR OFF>
J
If you select WDR, you may encounter the following problems. So set it to Not Used.
-
Unnatural change of colors that cause an unnatural image on the screen
-
Noise on the bright area of the image
As the performance of the WDR function may differ depending on the bright-area size of the
image, it is recommended to optimize the installation angle for the best performance.
At night operation, this function will be activated only if the incoming highlight exceeds a certain
area in a low contrast environment.
Increasing the maximum value may cause an unnatural portion of the image.
78_ setup screen
<WDR ON>
Advertisement
Table of Contents
