Table of Contents
Advertisement
To use Video analytics
It detects event that meets all conditions specified by sensitivity and size and the event
condition rules.
1. Select the video analysis mode.
2. Set <Sensitivity> and <Size>.
For further details on settings, refer
to "To use Motion detection". (Page
111~112)
3. Select <Analytics> tab.
4. Select the video analysis type.
• Passing : Detects an object passing
the area set by a user.
• Entering/Exiting : Detects an object
entering or exiting the area set by a
user.
• Appearing (Disappearing) : Detects
an object appearing or disappearing
in the area set by a user.
5. Set the video analysis rules.
For further details on settings, refer to
"To set the video analysis rules".
(page 114~115)
6. Set whether to use <Analytics rule
overlay>.
Specified rules of virtual lines and areas are displayed on the monitoring page.
7. Enable or disable <Detection result overlay>.
The location and size of detected motions will be marked by rectangles.
8. When done, click [Apply (
)].
English _113
Advertisement
Table of Contents
