Table of Contents
Advertisement
installation & connection
Notes for Waterproofing
This product is an indoor unit. If it is installed outdoors, use the outdoor housing to make it
waterproof.
Installing the unit on the wall by combining the outdoor housing and wall
mount
1. Install the wall mount on the vertical wall.
If the mount is installed on an inclined
wall, moisture can penetrate inside the
outdoor housing through the external
cable.
2. Wrap the screw part of the housing with
a sufficient amount of Teflon tape for
assembly.
3. When separating the dome cover and
fastening it to the housing frame, make
sure that the gasket is not loosened to
separate from the dome cover.
4. Install the wall mount adapter for
waterproofing, and apply the silicon
sealant between and around the wall and
wall mount for sealing.
J
Take particular caution to ensure that there
is proper sealing if the installed side is not
flat.
30_ installation & connection
Silicon
sealant
Wall mount
Screw
unit
Concrete wall
Teflon tape
Dome gasket
Advertisement
Table of Contents
