Table of Contents
Advertisement
setup screen
• Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
• Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : Automatically sets the iris adaptively to the ambient lighting and shutter
speed.
- Manual : Iris F-No is set manually.
• Iris F-No : If the iris mode is set to Manual, specify the F number of the iris.
As F-No increases, the iris decreases, so the screen is darkened, and as F-No decreases, the
screen is brightened.
• AGC mode : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
SSNR, Sens-up and <Auto> mode in daytime/nighttime mode setting cannot be used if the AGC
mode is set to <Off>.
Sens-up and <Auto> mode in daytime/nighttime mode setting cannot be used if the AGC mode is
set to <Manual>.
• AGC Val : If the AGC mode is set to Manual, specify one between 0dB and 36dB.
80_ setup screen
Advertisement
Table of Contents
