Table of Contents
Advertisement
For the best WDR performance, it is recommended to set the Iris mode to <Auto>.
Since the auto focus operation can be repeated depending on the lighting condition if user
backlight compensation is used, it is recommended to use the focusing mode of <One Shot AF>
or <Manual>.
Shutter cannot be used in WDR mode.
Exposure Setup
You can adjust the exposure level of the camera.
1. Select <Exposure>.
2. Select each item and set it properly.
• Brightness : Adjust the screen
brightness.
• Shutter mode : Adjust the electronic
shutter of the camera.
- ESC (Electronic shutter control)
: Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
Sens-up can be used only when the shutter type is <ESC>, and cannot be used when it is
<Manual> or <A.FLK>. But Sens-up can be used regardless of shutter type when WDR mode
is used. (apart from the influence of AGC)
The shutter cannot be used if the backlight compensation is set to WDR mode.
• Shutter speed : Control the shutter speed manually.
• SSNR3 : Specify the use of noise reduction.
SSNR3 mode cannot be used if the AGC mode is set to <Off>.
• Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
Sens-up can be used only when the shutter type is <ESC>.
Sens-up mode cannot be used if the AGC mode is set to <Off> or <Manual>.
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
moving object grows accordingly and the Auto Focus mode may not operate properly.
English _79
Advertisement
Table of Contents
