Use Caller Id To Automatically Set Date And Time - AT&T CL82450 User Manual

Telephone settings
Handset settings
6. Press qCID or pDIR to select the day then press
/SELECT, or enter the number using the dial pad keys.
MENU
7. Press qCID or pDIR to select the year then press
/SELECT, or enter the number using the dial pad keys,
MENU
then press
MENU
8. Press qCID or pDIR to select the hour then press
/SELECT, or enter the number using the dial pad keys.
MENU
9. Press qCID or pDIR to select the minute then press
/SELECT, or enter the number using the dial pad keys.
MENU
10. Press qCID or pDIR to highlight AM or PM, then press
confirm. There is a confirmation tone. Press
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and
day not set," before it plays the message.

Use caller ID to automatically set date and time

Follow the steps below to turn the CID time sync feature on or off. The
default setting is On.
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press qCID or pDIR to scroll to >Settings, then press
/SELECT.
MENU
3. Press qCID or pDIR to scroll to >Set date/time, then
press /SELECT.
MENU
4. Press qCID or pDIR to scroll to >CID time sync, then
press /SELECT.
MENU
5. Press qCID or pDIR to highlight On or Off, then press
/SELECT to confirm. There is a confirmation tone.
MENU
/SELECT to confirm.
OFF/
SELECT
13
SET DATE
--/--/--
SET TIME
--:-- --
/SELECT to
MENU
to cancel.
CLEAR
to
Settings
>
Website
Date & time
>
CID time sync
CID TIME SYNC
On
>