Using The Rc-V100 Remote Controller - Canon XF305 Instruction Manual

3
[J Other Functions]
[REMOTE Term.]
[Standard]
114
Using Optional Accessories
Recording
NOTES
• The camcorder is not compatible with the receiver's digital compass
and positioning interval functions. Also, the [Set now] option is not
available for the [J Other Functions]
• The GPS receiver's time will be set once when the receiver is attached
to the camcorder. The time will not be adjusted while recording.
• GPS information cannot be added to photos captured from a clip.

Using the RC-V100 Remote Controller

You can attach the optional RC-V100 Remote Controller to control the
camcorder (including advanced recording functions) from a distance.
Operating modes:
* In
1 Turn off the camcorder and connect the optional RC-V100
Remote Controller to the camcorder.
• For details, refer to the instruction manual of the RC-V100.
2 Turn on the camcorder and open the [REMOTE Term.] submenu.
[J Other Functions]
3 Select [RC-V100] and then press SET.
Options
[RC-V100]:
[Standard]:
mode, the remote controller can be used only to access the menus.
[REMOTE Term.]
Select this option to use the optional RC-V100 Remote
Controller.
Select this option to use other remote controllers, including
optional zoom remote controllers and commercially available
remote controls.
[GPS Auto Time] setting.
*