Operating Modes - Canon XF305 Instruction Manual

Introduction
1
When a function requires the use of the menu,
the quick reference shows the submenus and,
when applicable, the default setting for the
menu item. The example illustration indicates
that you can find the function by selecting the
[l Camera Setup] menu and then the [Image
Stabilizer] menu item.
When a procedure requires selecting an option,
the available options are listed within or after the
procedure. Brackets [ ] are used to refer to menu
options as they are displayed on screen.
12
About this Manual
Image Stabilizer
3 Recording
Image Stabilizer
Use the image stabilizer to compensate for camcorder shake in order to
achieve steadier shots. There are 3 methods of image stabilization; select
[l Camera Setup]
the method that best suits your needs.
[Image Stabilizer]

Operating modes:

[Standard]
1 Open the [Image Stabilizer] submenu.
2 Select the desired option and then press SET.
Options
[Powered] Q:
[Dynamic] P:
[Standard] O:
[Off]:
• By default, assignable button 1 is set to [Standard] but you can also set
• If you set an assignable button to [Dynamic IS] or [Powered IS]
• If the degree of camcorder shake is too high, the image stabilizer may
• When you are using [Dynamic] mode the edges of the picture may be
Operating modes
indicates that a function is available in the
operating mode indicated and
function is not available. For a detailed explanation,
refer to Turning the Camcorder On and Off (0 27).
[l Camera Setup] [Image Stabilizer]
• The icon of the selected mode appears on the bottom of the screen.
Powered IS is most effective when you are stationary and
zooming in on far subjects using high zoom ratios (the
more you approach the telephoto end). This mode is not
suitable for tilting and panning shots.
Dynamic IS compensates for a higher degree of
camcorder shake, such as when shooting while walking,
and is more effective as the zoom approaches full wide
angle.
Standard IS compensates for a lower degree of
camcorder shake, such as when shooting while remaining
stationary, and is suitable for shooting natural-looking
scenes.
Use this setting when the camcorder is mounted on a
tripod.
NOTES
it for another assignable button instead. You can press the button to
activate standard IS.
(0 111), you can press the button to turn the assigned mode on or
off.
not be able to fully compensate.
The arrow is used to abbreviate menu selections. For
a detailed explanation on how to use the menus,
refer to Using the Menus (0 30). For a concise
summary of all available menu options and settings,
refer to the appendix Menu Options (0 171).
indicates that the