Adjusting The Audio Level - Canon XF305 Instruction Manual

Recording Audio
Options
[CH1]: Records audio to each channel separately. Audio input
into CH1 is recorded to channel 1, while audio input into
CH2 is recorded to channel 2.
[CH1/CH2]: Audio input into CH1 is recorded to both channels. Audio
input into CH2 will not be recorded.
Adjusting the External Microphone's Sensitivity
You can adjust the external microphone's sensitivity if the XLR terminal
switch is set to MIC or MIC+48V.
1 Open the desired XLR terminal's sensitivity submenu.
[m Audio Setup] [Audio Input]
Mic Trimming]
2 Select the desired level and then press SET.
Available Sensitivity Levels
+12 dB +6 dB 0 dB
Activating the External Microphone's Attenuator
You can activate the external microphone's attenuator (20 dB) if the XLR
terminal switch is set to MIC or MIC+48V.
1 Open the desired XLR terminal's microphone attenuator submenu.
[m Audio Setup] [Audio Input]
Att.]
2 Select [On] and then press SET.
IMPORTANT
• When connecting a microphone or device that does not support
phantom power, make sure to set the XLR terminal switch to MIC or
LINE, respectively. If you set the switch to MIC+48V, the microphone or
device may be damaged.

Adjusting the Audio Level

You can set the audio level to auto or manual for each channel. When
both CH1 and CH2 are set to the built-in microphone (0 92), the
settings for CH1 will automatically be applied to CH2.
[XLR1 Mic Trimming] or [XLR2
-6 dB -12 dB
[XLR1 Mic Att.] or [XLR2 Mic
Recording
[m Audio Setup]
Audio Input]
[
[XLR1 Mic Trimming]
[XLR2 Mic Trimming]
[0 dB]
[m Audio Setup]
[Audio Input]
[XLR1 Mic Att.]
[XLR2 Mic Att.]
[Off]
3
95