Customizing Functions And Onscreen Displays; Customizing Functions - Canon XF305 Instruction Manual

Customizing Functions and Onscreen
Displays
Customize the camcorder to match your shooting style and needs. Use
the [J Other Functions]
of the camcorder's controls and functions operate in
Similarly, use the [M LCD/VF Setup]
customize the onscreen displays that appear during recording. You can
save these preferences along with other menu settings to an SD card and
use them again later (0 133).

Customizing Functions

The following table describes which functions can be customized using
[Custom Function]. For more details, refer to [Custom Function] (0 179).
Operating modes:
1 Open the [Custom Function] submenu.
[J Other Functions]
2 Select the desired function.
3 Change the setting option and then press SET.
Customizable Functions with [Custom Function]
Menu item
[Shockless Gain]
[Shockless WB]
[AE Response]
[Iris Limit]
[I. Ring Direction]
[F. Ring Control]
[F. Assist. B&W]
[Obj. Dist. Unit]
[Zoom Indicator]
[ZR-2000 AE SHIFT]
[Scan Reverse Rec]
[Character Rec]
[Custom Function] setting to adjust how some
[Custom Display] setting to
[Custom Function]
Determines the speed of the transition when the gain is changed.
Creates a softer transition when the white balance is changed.
Controls the camcorder's response when you change the automatic exposure setting.
Sets a maximum aperture value to be used for shooting.
Changes the direction of the adjustment when turning the iris ring.
Selects the sensitivity of the response when operating the focus ring.
Automatically switches the screen to B&W while the focus assistance functions (peaking and magnification) are
activated. You can have the screen switch to B&W when only the peaking is activated, when only the
magnification is activated or when both are activated.
Selects the units of distance (meters or feet) displayed when the camcorder shows the distance to the subject in
full manual focus or manual focus mode.
Selects the display of the zoom indicator between a graphic bar and a numeric display (0 to 99).
Selects the function of the AE SHIFT dial on the optional ZR-2000 Zoom Remote Controller between adjusting
either the exposure compensation or the aperture value.
Inverts the recorded image horizontally and/or vertically.
When this function is set to [On], all of the onscreen displays will be recorded to the clip exactly as they appear
on the screen.
Customization

Customizing Functions and Onscreen Displays

mode.
Description
4
[J Other Functions]
[Custom Function]
131