Number Of Rings; To Delete Outgoing Announcement - AT&T CL82109 User Manual

Handset settings
Answering system settings
To delete your outgoing announcement:
1. When the handset is in idle mode, press MENU/
menu.
2. Press /SELECT again.
MENU
3. Press CID or DIR
/SELECT.
MENU
4. Press CID or DIR
/SELECT, the system announces, "To play, press 2. To record,
MENU
press 7."
5. Press 3 to delete your recorded announcement.
When your announcement is deleted, the system answers calls with the pre-
recorded announcement described on the previous page.

Number of rings

You can set the answering system to answer an incoming call after two, four,
or six rings. You can also select toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after four
rings.
To set the number of rings:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press /SELECT again.
MENU
3. Press CID or DIR
then press
MENU
4. Press CID or DIR
press /SELECT.
MENU
5. Press CID or DIR
or TOLL SAVER.
• Toll saver - the answering system answers a call
after two rings if you have new messages, and
after four rings when there are no new messages.
This feature allows you to check for new messages
and avoid paying long distance charges when
calling from out of your local area.
6. Press /SELECT to confirm your setting and you
MENU
hear a confirmation tone.
NOTE: If you subscribe to caller ID/call waiting service through your telephone service
provider, see Answering system and voicemail on page 39.
to scroll to >ANS SYS SETUP, then press
to scroll to >ANNOUNCEMENT, then press
to scroll to >ANS SYS SETUP,
/SELECT.
to scroll to ># OF RINGS, then
to scroll and choose among 2, 4, 6
SELECT
SELECT
17
to enter the main
?BOT/!TZTUFN
EJSFDUPSZ
?BOT!TZT!TFUVQ
QMBZ!NTHT
?$!PG!SJOHT
SFNPUF!DPEF
$!PG!SJOHT
3