Multiple Handset Use; Handset Locator; Join A Call In Progress - AT&T CL82109 User Manual

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any
handset.
To start the paging tone:
• Press HANDSET LOCATOR at the telephone base to
start the paging tone on all handsets for 60 seconds.
NOTE: If you press
the ringer of the handset is off, but the page tone does not stop.
To stop the paging tone:
• Press PHONE
key (0-9, *, or #) on the handset(s).
–OR–
• Press HANDSET LOCATOR on the telephone base.
NOTE: The handset ringer volume also determines the volume of the paging tone. If the
handset ringer volume level is set to off, that handset is silent for all calls and paging
(page 10).
Join a call in progress (not available on model CL82109)
You can conference with another system handset while on a call. If a handset
is already on a call and you would like to join the call, press
PHONE
/FLASH
Press OFF/
CLEAR
to end the call. The call does not terminate until all handsets hang up.
NOTE: You can only use two system handsets at the same time on an outside call.
OFF/ or MUTE/
CLEAR
, SPEAKER, or any dial pad
/FLASH
or SPEAKER on another system handset.
or place the handset in the telephone base or charger
on a handset,
DELETE
24
++QBHJOH++