Wall Mount
To use the optional wall mount to mount the digital scanner on a wall, place the mount in the desired location
on the wall and secure by inserting two screws* appropriate for the mounting surface through the screw holes
on the mount, and into the surface. Insert the digital scanner into the mount as shown.
Securing the Wall Mount
Figure 1-8
*The recommended screws are two #6 screws (1" long) and two #6 washers.
For convenience, print this page and use the template below for mounting hole locations.
Insert mounting
screw
Wall Mounting Template
Figure 1-9
Insert mounting
screw
2.98"
Getting Started
1 - 7