Canon iPF600 series Service Manual page 51

[Maintenance]
Setting Item
[Maint. cart.]
[Replace P.head]
[Repl. S. Cleaner]
[Change Cutter]
[Move Printer]
[Clean Roller]
[Clean Platen]
[System Setup]
[Warning]
[Keep Media Size]
[Paper Size Basis]
[TrimEdge Reload]
[Noz. Check Freq.]
[Sleep Timer]
[Length Unit]
[Time Zone]
[Date Format]
[Date & Time]
[Language]
[Contrast Adj.]
[Reset PaprSetngs]
When exchanging the maintenance cartridge, choose Yes and follow the instructions on the screen.
Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low.
When replacing the Printhead , choose Yes and follow the instructions on the screen.
When replacing the shaft cleaner, select [Yes] and take appropriate actions according to the instructions
shown on the screen.
When replacing the cutter unit, select [Yes] and take appropriate actions according to the instructions shown
on the screen. Replacing the cutter unit will reset the cut count.
Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low.
When transferring the printer to another location, choose Yes and follow the instructions on the screen.
Use this function to clean inside the Top Cover . After you select Yes , the Carriage is moved in preparation
for Feed Roller cleaning.
Use this function to clean inside the Top Cover . After you select Yes , the Carriage is moved in preparation
for Platen cleaning.
Setting Item
[Buzzer]
[Detect Mismatch]
[Sht Selection]
[Roll Selection 1]
[Roll Selection 2]
[Date]
[Time]
T-1-20
Description, Instructions
T-1-21
Description, Instructions
Set the buzzer. Choose On for the buzzer to sound in case of errors.
Choose Warning for notification (display of a warning message) during printing if
the paper type specified in the printer menu does not match the paper type in the
printer driver. Choose None to continue print without notification. Choose Pause to
have printing paused under these circumstances. In this case, you can continue
printing by pressing the Online button.
Choose On to use the paper size setting as the basis for printing instead of other
settings. The margin setting of the printer menu will be used instead of the margin
setting of the printer driver if the latter is smaller, which may prevent text or images
in the margin from being printed. Choose Off to use the printer driver settings
instead. Even if the margin setting of the printer driver is smaller than that of the
printer driver, text or images will not be cut off. However, this requires longer paper
because the actual margin will be equal to the margin setting of the printer driver
plus the margin setting of the printer menu.
If sheet size detection is activated, choose whether ISO A3+ or ANSI B Super is
applied when an inbetween size is detected.
If roll size detection is activated, choose whether ISO A3 (297 mm) and 300 mm
Roll is applied when an inbetween size is detected.
If roll size detection is activated, choose whether 10in. (254 mm) or JIS B4 (257
mm) is applied when an inbetween size is detected.
Keeping a roll in the printer for a long time without printing on it may leave a
depression on the leading edge.
When printing quality is most important, we recommend setting this option to On so
that the paper edge is automatically cut before printing.
Specify the timing for automatic checks of nozzle clogging. Choose Off to disable
checking. Choose 1 page to check after each page is printed. Choose 10 pages to
check once after every ten pages are printed.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is displayed. You can switch the
unit displayed for Roll Length Set and the remaining paper amount displayed in the
submenu.
Specify the time zone. Time zone options indicate a main city in this time zone and
the difference from Greenwich Mean Time.
Specify the date format.
Set the current date.
Set the current time.
Specify the language used on the Display Screen.
Adjust the contrast of the Display Screen.
Restores settings that you have changed with Media Configuration Tool to the
factory default values.
Chapter 1
1-37