Chapter 4
4) Remove the front duct[2] by removing the four screws[1].
5) Turn the pulley[1] in the direction of the arrow so that the spur unit[2] is at the top position.
6) While pressing down the protrusion[A], slide the spur unit[1] in the direction of the arrow to remove it.
g) Handling the Feed Roller
The feed roller is an important mechanical component of the printer. Follow the precaution below when handring it.
- Do not touch the feed roller surface(coated surface).
- Do not scratch or dent the feed roller.
4-28
[1]
[1]
[2]
F-4-70
[1]
[2]
F-4-71
[A]
[1]
F-4-72