Canon iPF600 series Service Manual page 133

(12) Raise the printhead fixer cover to open it fully.
(13) Holding the knobs[1], take out the printhead from the case.
- When handling the Printhead, always hold it by the grips [1].
- Never touch the printhead nozzles [2] or the metal contacts [3]. The printhead can damage or a printing failure can occur. Do not reattach the removed protective
caps.
- Dispose of these parts following the local regulation.
(14) Remove the orange protective cap 1 [1], and then pull the protective cap 2 [2] downward with the knob pressed.
(15) Insert the print head in the carriage with the nozzles down and the contacts in the back. Insert it as far as it will go while taking care that the nozzles and contacts
do not touch the carriage.
F-3-15
[1]
[1]
F-3-16
[2]
[1]
[3]
F-3-17
[1]
[2]
F-3-18
F-3-19
Chapter 3
3-5