Table of Contents
Advertisement
APPENDIX M
Remote Keyboard
This function allows the user to select the appropriate RegCom-Pro on the network with the Select Address setting. Once
this is done you then click "Programming". The Vnetworker will then signal the VSI-Pro to exit the register interface mode
and go to the programming mode. Note: While in this mode all data from the cash register will not be stored or displayed
in the VSI-Pro and will be lost.
After a brief pause, communication is established with the VSI-Pro and the following menu will be displayed. This is
the same as the on-screen menu and using the "Up", "Down", "Enter" buttons you can navigate the VSI-Pro menu
just like at the local pushbuttons.
Control Button
• Programming
• Up
• Down
• Enter
• Erase Character
• Save String Input
• Reset
RegCom-Pro POS / Cash Register Interface
Figure 153 : Remote Keyboard
85
RS-485 VNETWORKER
Address Select :
You should select the address for
Programming, then press the
Programming Button
Advertisement
Table of Contents
