Table of Contents
Advertisement
4. PROGRAMMING
DVR SELECTION
Click the "Up" or "Down" button to move the cursor to "DVR
SELECTION" and Click "Enter". The following menu will appear:
Figure 117: DVR Selection sub menu
DVR-3011 / DVR-3021 / MVDR3000 / MVDR5000
Click the "Up" or "Down" button to move the cursor to "DVR-
3011,3021" or "MVDR3000/MVDR5000" and click "Enter". The
following menu will appear . An asterisk appears to indicate
your selection.
DEST ID and SRC ID
Figure117: DVR3011,3021,MVDR3000,MVDR5000
Choices: 1 through 32
sub menu
Note:The DEST ID and SRC ID can not be the same value or
can not send any command.
TIME SEARCH
Click the "Up" or "Down" button to move the cursor to
"TIME
SEARCH"
and click "Enter". The following sub-menu will appear:
Figure 117: Display of TIME SEARCH
Use the "Up" or "Down" button to scroll to the desired exception in the transaction history. As you select the lline the
exception string will display at the top of the page.
Then click "Enter" and the DVR will be commanded by the RegCom-Pro to go to the selected transaction via its Time/
Date Search function. Therefore you must make sure the T/D of the DVR is very close to the setting of the RegCom-
Pro or their will be an effor in the actual search time. Verify the proper connection to the DVR from the diagram on the
following page.
EXAMPLE
Define "NO SALE" as an exception string In Exception No. 2 , HISTORY BUFFER to be "ON", and define OPERATOR
"IN". If the remote monitor is displayed "NO SALE" ,the RegCom-Pro will keep this displayed line on Exception History.
RegCom-Pro POS / Cash Register Interface
64
Advertisement
Table of Contents
