Test/Demo Mode; Register Demo - AVE RegCom-Pro Operation Manual

4.9

TEST/DEMO MODE

Select "REMOTE" tab, The following page will appear:

REGISTER DEMO

This demonstration simulates transaction data from a register. This is used to demonstrate the RegCom-Pro's capabilities
with just a monitor and camera without having a register hooked up. When the demo mode is active the RegCom-Pro
thinks the data is actually coming from a real register. You can use this demo data to configure exceptions and alarms
to be fully functional for a complete customer demonstration.
Select check box "Demo On Power Up" in Register Demo section, DEMO ON POWER UP and TYPE drop-down menu
will appear:
RegCom-Pro POS / Cash Register Interface
Figure104 : REMOTE PAGE
52
4. PROGRAMMING