Register Selection - AVE RegCom-Pro Operation Manual

4. PROGRAMMING
Figure 8 :RegCom-Pro and Computer Can Establish Communication
Once you have "Access" then you can do any function on this menu screen. "Upload" data which reads the current
settings of the RegCom-Pro into the PC. "Download" which sends the PC settings to the RegCom-Pro. "Set Time" can
set a new time or PC sync time to the RegCom-Pro. "Load History" reads the History File of Exceptions from the
RegCom-Pro and saves as a text file on the PC.
Note: If the cable is disconnected, RegCom-Pro powered down, PC program closed, the PC and/or the RegCom-Pro
has a 30 second timeout and will reset itself for normal operation.

4.3 REGISTER SELECTION

To select a specific register, Select "REGISTER SELECT" Tab and select specific register from drop down menu. The
REGISTER SELECT menu will bring up a sub-menu. REGISTER SELECT automatically formats the RegCom-Pro to
match your register's communication settings. However, if you need to change these settings, you can do so through the
COMMUNICATION menu described later in this manual.
Whenever you select a register in this menu, certain programming features are reset to the
default settings. Always set the register selection first, get the data on-screen, then proceed
with additional programming.
RegCom-Pro POS / Cash Register Interface
16