Installing the cover
Installing the cover (tower)
If you have a tower model, continue with "Installing the cover (tower)". If you have a
rack model, go to "Installing the cover (rack)" on page 51.
Note:
The illustrations in this document might differ slightly from your hardware.
Left-side cover
To install the server left-side cover:
1. Align the cover with the left side of the server, about 25mm (1inch) from the front
of the server; place the bottom of the cover on the bottom rail of the chassis.
2. Insert the tabs at the top of the cover into the slots at the top of the server.
3. Hold the cover against the server and slide the cover toward the front of the
server until the cover clicks into place.
Slots
Chapter 3. Installing Options
49