Avaya Call Server Configuration; Configuring A Standalone Station; Configuring An Associated Station - Avaya 3606 Installation And Configuration Manual

4. Avaya Call Server Configuration

You can configure the 3606 Wireless Telephone as a stand-alone station or associate it with a desk
station. When the 3606 Wireless Telephone is associated with a desk station, the user can make and
handle calls from either the 3606 Wireless Telephone or the desk station.
4.1

Configuring a Standalone Station

To configure a 3606 Wireless Telephone as a stand-alone station, you must add a station on the Avaya
Call Server for the 3606 Wireless Telephone.
To administer a stand-alone station on the Avaya Call Server for a Wireless Telephone:
1. From the Avaya Call Server administration software, add a new station.
2. Set "Type" to "4606."
3. Complete the remainder of the station form as you would for a desk station.
4. Repeat Steps 1 through 3 for each stand-alone Wireless Telephone.
4.2

Configuring an Associated Station

To configure a 3606 Wireless Telephone as an associated station, you must add a station on the Avaya
Call Server for the 3606 Wireless Telephone and then associate that station with a desk station.
To administer an associated station on the Avaya Call Server for a Wireless Telephone:
1. From the Avaya Call Server administration software, add a new station.
2. Set "Type" to "4606."
3. Set "Security Code" to the same security code used for the extension to which this Wireless
Telephone will be associated (that is, the desk station). You can use a different security code,
but to make it easier for the user it is recommended that you use the same security code as the
desk station.
4. Set "Message Lamp Ext" to the extension of the associated desk station.
5. Set "Bridged Call Alerting" to "y."
6. Set "Auto Select Any Idle Appearance" to "y."
7. For Button Assignments, create bridged appearances to the line appearances on the desk
station.
8. Add additional feature buttons to buttons 4 and 5, if desired.
9. Repeat Steps 1 through 8 for each Wireless Telephone.
!
When making changes to feature buttons, the phone must be power
cycled.
555-301-101, Issue 2
February 2003
3606 Wireless IP Telephone
Installation and Configuration Guide
11