Cleaning And Maintenance - Fisher & Paykel HP90IHCB3 Installation Instructions & User Manual

Hide thumbs Also See for HP90IHCB3:
Table of Contents

Advertisement

ImpORTANT!
Never use abrasive or oil based cleaners
General maintenance
Before performing any cleaning or maintenance on your cooker hood, ensure that the
power supply is switched off to the hood.
The cooker hood should be cleaned regularly using a mild, liquid detergent to avoid a
build up of grease occurring. Grease deposits are corrosive which can cause damage to
your cooker hood.
Note: in areas of high humidity or coastal environments, cleaning should be carried out
more frequently.
aluminium filters
Depending on use, and at least once a month, the
aluminium grease filters should be removed and cleaned
with hot soapy water or in a dishwasher.
If washed in a dishwasher, the filters should be placed in
an upright position to prevent food from falling on them.
After rinsing and drying, replace the filters.
Note: some discolouration of the frames may occur.
Removing the aluminium filters:
Open the glass panel.
1
Pull the relative filter catch, tilting it downwards until it disengages from the supports.
2
Reverse these instructions when refitting the filters.
3
Carbon filters – for use in recirculation mode
Active carbon filters are disposable items designed to remove grease and odours from
cooking vapours before the air is channelled back into the kitchen. The active carbon
filters must be replaced periodically to work properly, at least once every three months,
depending on the frequency with which the cooker hood is used.
Note: fully saturated carbon filters can become a
barrier to air movement therefore limiting cooker
hood performance. In the event of fire, grease
laden filters could be flammable and therefore
regular replacement is recommended.
Light bulb replacement
Please note replacement bulbs are not covered
by warranty.
Open the glass panel.
1
Remove the aluminium filters.
2
Unscrew the light bulb.
3
Insert the replacement bulb into the lamp socket.
4
Replace the aluminium filters.
5
Replace the glass panel.
6

CLEaNING aNd MaINTENaNCE

A
360˚
C
B
Bulb replacement
17

Advertisement

Table of Contents
loading

Table of Contents