Table of Contents
Advertisement
WARNING!
Unplug or disconnect the appliance from the power supply before servicing
or cleaning.
IMPORTANT!
Never use abrasive or oil based cleaners.
●
Wear gloves to protect against sharp edges.
●
Maintenance
The rangehood should be cleaned regularly using a mild, liquid detergent and a clean
soft cloth to avoid a build-up of grease occurring. Avoid the use of corrosive chemicals,
abrasive cleaning products, hard brushes and steel wool pads. Grease deposits are
corrosive which can cause damage to your rangehood.
Note: in areas of high humidity or coastal environments, cleaning should be carried out
more frequently.
GREASE MESH FILTERS
As needed the aluminium grease filters should be removed and cleaned with h ot soapy water
or washed separately in a dishwasher.
If washed in a dishwasher, the filter should be placed in an upright position.
After rinsing and drying, replace the filters.
Note: Discolouration of the filters may occur.
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps:
1.
Angle the filter into the slots at the back of the hood.
2.
Push the button on the handle of the filter.
Release the handle once the filter fits into a resting position.
3.
Repeat to install all filters.
4.
16
CLEANING AND MAINTENANCE
1
2
Advertisement
Table of Contents
