Fisher & Paykel HP90IHCB3 Installation Instructions & User Manual page 8

• If the supply cord of this equipment is damaged
it must only be replaced by the manufacturer, its
service agent or similarly qualified person in order
to avoid a hazard.
• always switch the power off prior to installation,
servicing or cleaning the cooker hood.
• Never use the cooker hood without the filters
in place.
• Stainless steel or powdercoat is very easily damaged
during installation if abraded or knocked by tools.
It is recommended to protect the top of the cooker
hood with cardboard or plastic bag during the
installation to minimise the risk of damage occurring.
• To reduce the risk of damage occurring to hob,
it is recommended that the surface of the hob is
protected with cardboard or a similar object during
installation of the cooker hood.
• a power outlet should be within 750 mm of the
motor assembly and can be either on the wall,
behind the chimney or in the ceiling.
• To comply with electrical safety regulations, this
cooker hood must be plugged into a socket near the
appliance. The socket must be accessible, or have an
accessible isolating switch, to enable the end user
to isolate the cooker hood from the power for the
purpose of internal cleaning or maintenance.
• ducting accessories are not supplied. all ducting must
comply with local requirements and building codes.
• CauTION: accessible parts may become hot when
used with cooking appliances.
6
SafETy aNd waRNINGS