Installation
WARNING!
This product is heavy and requires two persons for installation.
WARNING!
failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards.
The manufacturer is not liable for any damage caused by not following these instructions.
Prepare for installation.
1
Before installing your cooker hood:
Please read the instructions carefully.
●
●
Unpack the cooker hood and check that all functions are working.
●
●
Ensure that the voltage (V) and the frequency (Hz) indicated on the serial plate
●
●
match the voltage and frequency at the installation site.
The stainless steel and glass surfaces of the cooker hood are very easily damaged
●
●
during installation if grazed or knocked by tools. Please take care to protect the
surfaces during installation.
Protect the hob surface below with cardboard, or the like, to prevent damage
●
●
occurring whilst the cooker hood is being installed above.
Fit the 150 mm ducting adapter with non return flap to the cooker hood using the
2
screws supplied.
Provide an opening on the underside of the cupboard (see product and cabinetry
3
cutout dimensions).
width
12
INSTaLLaTION INSTRuCTIONS
depth
2.3
2.1
2.2