Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the telephone line socket
until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
4
5
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226AL.
R Use only the supplied telephone line cord.
0303_TGD3xxNZ(en-en)_ver002.pdf 9
n Charger
Note:
R Use only the supplied Panasonic AC
Battery installation
R USE ONLY rechargeable Ni-MH batteries
R Do NOT use alkaline/manganese/Ni-Cd
R Confirm correct polarities (
3
4
1
2
Getting Started
Connect the AC adaptor plug to the unit
until you hear a click.
Connect the AC adaptor to the power
outlet.
1
adaptor PNLV233AL.
1
AAA (R03) size (
).
batteries.
1
R Follow the directions on the display to set
up the unit.
2
,
).
9
2015/03/03 10:28:03