Advanced New Message Alerting Features - Panasonic KX-TGD310NZ Operating Instructions Manual

Answering System
Using the handset
When new messages have been recorded,
is displayed on the handset with the total
number of new messages.
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Note:
R To switch to the receiver, press M
Operating the answering system
MMENUN a a MOKN
Key Operation
MDN or MCN Adjust the receiver or speaker
volume (during playback)
1 or MFN Repeat message
(during playback)
2 or MEN Skip message
(during playback)
3 Enter the "Settings" menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MMENUN
Pause message
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
*3 Erase currently playing
*4
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
40
0303_TGD3xxNZ(en-en)_ver002.pdf 40
MbN: "Play" a MOKN
*3 You can also erase as follows:
MMENUN a MbN: "Erase" a MOKN a
MbN: "Yes" a MOKN
Calling back (Caller ID subscribers
only)
1
Press MMENUN during playback.
2
MbN: "Call Back" a MOKN
n Editing the number before calling back
1
Press MMENUN during playback.
N.
2
MbN: "Edit & Call" a MOKN
3
Edit the number. a M
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MOKN a MOFFN
*1
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the "Base Unit Beep"
setting is turned on. The default setting is
*2
"Off".
1
MMENUN#339
2
MbN: Select the desired setting. a MOKN
a MOFFN
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
N
2015/03/03 10:28:05