Table of Contents
Advertisement
2.2.2 Wall-mount Plate Mounting
To install the Industrial Media Converter on the wall, please
follow the instructions described below:
Step 1:
Remove
Converter; loosen the screws to remove the DIN-rail.
Step 2:
Place the wall-mount plate on the rear panel of the
Industrial Media Converter.
Step 3:
Use the screws to screw the wall-mount plate on the
Industrial Media Converter.
Step 4:
Use the hook holes at the corners of the wall-
mount plate to hang the Industrial Media Converter
on the wall.
Step 5:
To remove the wall-mount plate, reverse the steps
above.
the
DIN-rail
from
the
Industrial
Media
19
Advertisement
Table of Contents
