Bluetooth Settings - Intermec PR2 User Manual

Appendix B — Printer Settings

Bluetooth Settings

50
Media and Printing Settings (Continued)
Setting
Media Width
Print Speed
Start Adjustment
Stop Adjustment
You can view and configure Bluetooth settings from:
• the printer web page.
• PrintSet version 5.2 or later.
Bluetooth Settings
Setting
Connectable
Device Address
Description
Sets the width of the printable area
measured from the media margin
(X) along the printhead. Unit of
measurement is defined by the Unit
of Measure parameter.
Sets how fast the printer prints
labels. Unit of measurement is
defined by the Unit of Measure
parameter.
Sets the length of media the printer
feeds (positive value) or retracts
(negative value) before printing a
label. Unit of measurement is
defined by the Unit of Measure
parameter.
Sets the length of media the printer
feeds (positive value) or retracts
(negative value) after printing a
label. Unit of measurement is
defined by the Unit of Measure
parameter.
Description
Determines if other Bluetooth
devices can connect to the printer.
(read-only) The Bluetooth MAC
address of the printer.
PR2 and PR3 Mobile Receipt Printer User Manual
Default
PR2: 384
PR3: 576
75 mm/s
0
0
Default
Enable
N/A