Lowrance ELITE TI Installation Manual page 48

48
If Export Region is selected, the chart page will be displayed,
centered on vessel location. Using the touch screen, adjust the red
boundary box to outline the area to be exported. The export option
offers different file formats to save as:
User data file version 5: Use with current units (NSO evo2, NSS
•
evo2, NSS, NSO, NSE, Zeus, Zeus Touch, HDS Gen2, HDS Gen2
Touch, HDS Gen3, GO XSE units, Vulcan units, and ELITE Ti units).
Offers most detail.
User data file version 4: Use with current units (NSO evo2, NSS
•
evo2, NSS, NSO, NSE, Zeus, Zeus Touch, HDS Gen2, HDS Gen2
Touch, HDS Gen3, GO XSE units, Vulcan units, and ELITE Ti units).
User data file version 3 (with depth): Use with legacy GPS
•
chartplotters.
User data file version 2 (no depth): Use with legacy GPS
•
chartplotters.
GPX (GPS Exchange, no depth): Use with some other
•
manufacturers' GPS products, and PC applications.
After you select the file type, select Export and destination memory
card. The receiving GPS/PC typically needs to be set to allow import
of Waypoints.
The 'Serial port' option outputs the waypoints over NMEA 0183. The
receiving GPS/PC will typically need to be set to allow import of
waypoints.
Settings database export
Select Setting database to export the Settings database and select
the memory card destination.
Importing a database
Later, if the unit has been restored to factory defaults or user data is
accidentally deleted, return to the files page, select the backed up
file, and then Import. View file details for creation date.
Software Setup | ELITE Ti Installation Manual