Lowrance ELITE TI Installation Manual page 20

20
6.
Check the fit of the unit, and use a file to remove any remaining
obstructions. If water-tightness is required, apply a thin,
continuous bead of sealant to the back of the unit prior to final
installation. Sealant should be of a 'neutral cure' type to prevent
damage to the plastics.
7.
Secure the unit with screws (not supplied). For recommended
screw size and type, refer to the mounting template. Once
screws are fully tightened, ensure there is complete contact
with the mounting surface.
8.
Press the four corner clips back into position.
Installation | ELITE Ti Installation Manual