Ford f-650 2013 Owner's Manual page 185

184
Connecting the Jumper Cables
WARNING: Do not connect the end of the second cable to the
negative (-) terminal of the battery to be jumped. A spark may
cause an explosion of the gases that surround the battery.
Note: Do not attach the negative (-) cable to fuel lines, engine rocker
covers, the intake manifold or electrical components as grounding points.
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1
3
Make sure that the cables are clear of fan blades, belts, moving parts of
both engines, or any fuel delivery system parts.
2013 F-650/750 (f67)
Owners Guide gf, 1st Printing, October 2012
USA (fus)
Roadside Emergencies
1. Connect the positive (+) jumper
cable to the positive (+)
terminal of the discharged
battery.
2. Connect the other end of the
positive (+) cable to the positive
(+) terminal of the assisting
battery.
3. Connect the negative (-) cable
to the negative (-) terminal of
4
the assisting battery.
4. Make the final connection of the
2
negative (-) cable to an exposed
metal part of the stalled
vehicle's engine, away from the
battery and the carburetor or
fuel injection system.