Ford f-650 2013 Owner's Manual page 137

136
Six–speed TorqShift® Transmission
WARNING: Always set the parking brake fully and make sure
the gearshift is latched in position P. Turn the ignition to the off
position and remove the key whenever you leave your vehicle.
WARNING: Do not use the tow/haul feature when driving in icy
or slippery conditions as the increased engine braking can cause
the rear wheels to slide and the vehicle to swing around with the
possible loss of vehicle control.
Position P
This position locks the transmission and prevents the rear wheels from
turning.
To put your vehicle in gear:
1. Start the engine.
2. Press the brake pedal.
3. Move the gearshift lever into the desired gear.
To put your vehicle in position P:
1. Come to a complete stop.
2. Move the gearshift lever and securely latch it in position P.
Position R
With the gearshift lever in position R, the vehicle moves backward. Always
come to a complete stop before shifting into and out of position R.
Position N
With the gearshift lever in position N, the vehicle can be started and is
free to roll. Hold the brake pedal down while in this position.
Position D
This is the normal driving position for the best fuel economy. This position
allows automatic upshifts and downshifts in gears one through six.
Position 4
This position allows automatic upshifts and downshifts in gears one
through four.
2013 F-650/750 (f67)
Owners Guide gf, 1st Printing, October 2012
USA (fus)
Transmission
P R N D 4 2 1