WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
If the fuse is not blown and the brake lamps are working properly, the
following procedure allows you to move the gearshift lever from position P:
2013 F-650/750 (f67)
Owners Guide gf, 1st Printing, October 2012
USA (fus)
Transmission
1. Apply the parking brake, and
turn the engine off.
2. Remove the lower finish panel
below the steering column.
3. Turn the key to the on position,
but do not start the engine.
4. Pull back on the solenoid, and
at the same time, shift the
transmission into position N.
5. Start the vehicle.
See your authorized dealer as
soon as possible if this
procedure is used.
135