Setup - Mitsubishi 738 Basic Owner's Manual

24 4. TV Menus
o Select either English or Spanish for omscreen menus.
Select the language for a digital program from the ANT input (if available).
Setup O)ock
Set the TV clock to:
* Use the TV Timer to power on the TV automatically at a preset time
* Receive correct updates to ChannelView listings
Note: When the Daylight Savings Time change occurs, you must open this menu and set the TV's clock ahead or back.
Setup Timer
The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,
time, input, and channel for the Timer. If the TV is already on at the set time, the TV will auto-
maticaUy change to the designated channel or input.
The TV clock must be set before you can use the Timer feature.
As a reminder that the TV Timer is set, the TV POWER indicator flashes slowly while the TV is powered off.
When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
See "Memorizing Channels with Channel Scan" on page 7 to scan for all available channels
on the ANT input.
Edit
After channel scan, Edit lets you add and delete memorized channels.
Press PAGE i_/V to jump to the next or previous page of channel numbers.
Press A V _ _ to move through all channel numbers, one at a time.
Adding/Demeting Channems Using the Channem Edit Menu
* Channels marked with a check are in memory.
* To add or delete a channel from memory, highlight the channel number and press ENTER.
To add a single digital channel not in the list, see the full owner's guide at www.mitsubishimtv.com.
Lamp
Blue Glow
(838 series)
Standard,
On, Off
Standard is for most viewing conditions. Use Bright in brightly lit rooms. You may
notice increased fan noise when using the Bright setting.
Select On to see blue accent lighting when the TV is powered on.
Ethemet Connection
Wiremess Connection
See "Home Network Setup," page 19.
For assistance ca((1(800} 332-2119