Appendix C: Troubleshooting - Mitsubishi 738 Basic Owner's Manual

32 Appendices
Appendix (74 Troubleshooting, continued
A/V Reset
(for all inputs)
Channel
Memorization
Lock Menu
Pass Code
Control=Panel
Lock Release
System Reset
TV Reset
IM PORTANT:
Use this reset
only if other
troubleshooting
has been unsuc-
cessful.
VUDU
Reset VUDU
Account Pass-
word
VUDU
Reset Parental
Controls Pass
code
To reset audio and
video adjustments for
all inputs to the original
factory settings.
To erase and
re-memorize channels
on the ANT input.
To change your Lock
menu pass code
To re-enable the
control-panel buttons
after activation of the
Control-Panel Lock
If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
To reset all consumer-
accessible settings
and all memories to
the original factory
defaults.
Use TV Reset if the TV
can respond to con-
trois but TV behavior is
abnormal.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
You have forgotten
your account pass-
word.
You have forgotten
your pass code.
While viewing the TV, press the
control-panel buttons INPUT and
VOLUME DOWN at the same time for at
least two seconds.
1. Press MENUand go to Setup >
Channel.
2. Highlight the reception mode,
e.g. Ant Air, and press ENTER.
3. Highlight All Channels and
press ENTER.
4. Highlight Scan.
5. Press ENTER to start channel
memorization.
All Audio and Video settings are
returned to the original factory
settings, including global settings
not affected by Picture > Reset.
All previously memorized chan-
nels for the antenna input are
erased and a new set of memo-
rized channels is created. To
add or delete individual channels,
see the Setup > Channel > Edit
menu instructions on page 24.
See the detailed owner's guide at www.mitsubishi-tv.com for instructions.
Press and hold the INPUTbutton on
the control panel for ten seconds. If
the TV is powered off, you can now
press the POWER button to turn it on.
Press and hold the POWER button on
the control panel for ten seconds.
=
.
=
While wewing the TV, press
MENUto display the TV main
menu.
With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press EXiTor MENUto
back out.
• If you wish to continue,
press ENTER to erase all
memories and settings.
Using a computer, go to
www.VUDU.com.
Call VUDU Customer Care at
1-888-554-VUDU (8838).
Allows the control panel to be
unlocked if the remote control is
misplaced.
The TV will turn off. Power on the
TV and the green LED will flash
quickly for about one minute. The
changes you made most recently,
before using SYSTEM RESET, m ay
be lost.
The TV will start the initialization
process and then turn off.
Power on the TV and the front
green LED will start flashing. All
memory and settings outlined in
this Owner's Guide will need to
be set again.
Reset your account password
from the VUDU website (requires
access to e-mail).
VUDU Customer Care will reset
your pass code.
For assistance call 1(800) 332-2119