Setting The Power On Mode - Mitsubishi PD-5030 Owner's Manual

PROGRAM TIMER
This sets the day and time at which the power will be
switched ON/OFF as well as the input mode.
Example: Setting so that the power will be switched
on at 8:30 A.M., Monday, displaying RGB2 source,
and switched off at 10:30 A.M.
Perform Steps 1-2 of Using the TIMER, then...
3. Use the ▲ and ▼ buttons to select "PROGRAM".
TIMER
PRESENT TIME
PROGRAM
SEL. ADJ.
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
The "PROGRAM TIMER" screen appears.
5. Adjust using the and
buttons.
PROGRAM TIMER
DATE ON OFF
MON 08 : 30 10 : 30
— - - : - - - - : - -
— - - : - - - - : - -
- - : - - - - : - -
—
— - - : - - - - : - -
— - - : - - - - : - -
— - - : - - - - : - -
SEL. ZOOM ADJ.
The mode switches as follows each time the ZOOM
/ buttons are pressed:
• Date
→ — ↔ SUN ↔ MON ↔ ... ↔ SAT ↔ * ↔ *SUN ↔ *MON ↔ ... ↔ *SAT←
• ON/OFF Hour
→ 00 ↔ 01 ↔ 02 ↔ ..... ↔ 21 ↔ 22 ↔ 23←
• Minute
→ 00 ↔ 01 ↔ 02 ↔ ..... ↔ 57 ↔ 58 ↔ 59←
• INPUT
→ — ↔ LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ←
→ MONLINK ↔ RGB2 ↔ RGB1 ↔ HD/DVD2 ←
• FUNCTION
→ — ↔ ORBITER ↔ INVERSE ↔ WHITE ↔ DELETE←
Information
PROGRAM TIMER settings
DATE ....................... Set the day of the week (e.g.
Sunday).
ON (hour, minutes) .... Set the time at which the power
will be turned on in the 24-hour
format.
OFF (hour, minutes) ... Set the time at which the power
will be turned off in the 24-hour
format.
: OFF
EXIT RETURN
buttons and ZOOM /
INPUT FUNCTION
RGB2 INVERSE
— —
—
—
— —
— —
— —
— —
EXIT RETURN
INPUT ..................... Set the input mode that will be
FUNCTION ............. Set the LONG LIFE function.
To reset the program
1. Align the cursor with the DATE field that you wish
to reset.
2. Using / buttons, select "–".
3. Press the "MENU/ENTER" button.
Special characters in the PROGRAM TIMER
screen
PROGRAM TIMER
DATE ON
MON 08 : 30
TUE - - : - -
SAT 08 : 30
08 : 30
*FRI
— - - : - -
SAT 08 : 30
* 15 : 30
SEL. ZOOM
• An asterisk "*" in the DATE field
An asterisk "*" means "every". For example, "*FRI"
means every Friday and "*" means everyday.
• A hyphen "-" in the ON field or OFF field
If any hyphen remains in the ON field or OFF field, the
FUNCTION can not be set.
• A hyphen "-" in the FUNCTION field
A hyphen "-" means last mode (the mode that was last
selected at the time the power was switched off).

Setting the power on mode

This function sets the input mode at the time the power is
switched on.
Example: Setting "VIDEO2"
1. On the MAIN MENU, select "OPTION3", then press
the MENU/ENTER button.
The "OPTION3" screen appears.
2. Use the ▲ and ▼ buttons to select "PWR. ON MODE".
3. To set the PWR. ON MODE to "VIDEO2"...
Use the and buttons to select "VIDEO2".
The mode switches as follows each time the
button is pressed:
The available inputs depend on the setting of "BNC
INPUT".
RGB:
→ LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←
COMP:
→ MONLINK ↔ RGB2 ↔ RGB1 ↔ HD/DVD1 ←
→ LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ←
→ MONLINK ↔ RGB1 ↔ HD/DVD2 ↔ HD/DVD1 ←
PREVIOUS PAGE
TIMER
PWR. ON MODE
BUTTON LOCK
IR REMOTE
LOOP OUT
SEL.
31
displayed when the timer is on.
OFF INPUT FUNCTION
10 : 30 RGB2 INVERSE
—
18 : 15 —
WHITE
12 : 15 VIDEO1
10 : 00 HD/DVD1 —
- - : - - — —
12 : 15 VIDEO1 WHITE
—
16 : 00 RGB1
ADJ. EXIT RETURN
OPTION3 3 / 3
: VIDEO2
: OFF
: ON
: OFF
ADJ. EXIT
RETURN
or