Battery Installation And Replacement - Mitsubishi PD-5030 Owner's Manual

!5 AUTO POSITION
Available for PC Inputs Only. Press this button to
automatically adjust the size and position of the current
screen resolution.
!6 Remote control signal transmitter
Transmits the remote control signals.
!7 Remote Jack
Insert the plug of the remote cable here when using
the supplied remote control in the wired condition.

Battery Installation and Replacement

Insert the 2 "AAA" batteries, making sure to set them in
with the proper polarity.
1.Remove the remote control's back cover by gently
pressing the rigid tab in the direction of the arrow.
2.Install the batteries according to the (+) and (–) indication
inside the case. For ease of installation, install the
negative (–) side first.
3.Replace the cover.
5