Table of Contents
Advertisement
Information
RGB SELECT modes
One of these 6 modes must be selected in order to
display the following signals correctly.
AUTO .............. Select the suitable mode for the
specifications of input signals as
listed in the table "Table of Signals
Supported" on page 40.
STILL .............. To display VESA standard signals.
(Use this mode for a still image from
a computer.)
MOTION .......... The video signal (from a scan
converter) will be converted to RGB
signals to make the picture more
easily viewable. (Use this mode for a
motion image from a computer.)
WIDE1 ............. When an 852 dot
with a horizontal frequency of
31.7kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE1.
WIDE2 ............. When an 848 dot
with a horizontal frequency of 31.0
kHz is input, the image may be
compressed horizontally. To prevent
this, set RGB SELECT to WIDE2.
DTV ................. Set this mode when watching digital
broadcasting (480P).
See page 40 for the details of the above settings.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the "1080B" mode to "1035I"
1. On the MAIN MENU, select "OPTION1", then press
the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the ▲ and ▼ buttons to select "HD SELECT".
3. To set the HD SELECT mode to "1035I" ...
Use the
and
buttons to select "1035I".
The mode switches as follows each time the
button is pressed:
→1080B ↔ 1035I ↔ 1080A ←
OPTION1
MENU
BNC INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
ADJ.
480 line signal
480 line signal
or
1 / 3
:
RGB
:
AUTO
:
1035
I
:
OFF
:
OFF
EXIT
RETURN
Information
HD SELECT modes
1080B ............... Standard digital broadcasts
1035I ............... Japanese "High Vision" signal format
1080A ............... Special Digital broadcasts (for
example : DTC100)
Setting the Input Skip
When this is ON, inputs with signals which are not present
will be skipped over and inputs whose signals are being
transmitted will be displayed.
This setting is valid only for the INPUT SELECT button
on the unit.
Example: Set to "ON"
1. On the MAIN MENU, select "OPTION1", then press
the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the ▲ and ▼ buttons to select "INPUT SKIP".
3. To set the INPUT SKIP mode to "ON"...
Use the
and
buttons to select "ON".
The mode switches as follows each time the
button is pressed:
OFF ↔ ON
MENU
BNC INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
Information
INPUT SKIP settings
OFF ........... Regardless of the presence of the signal,
scan and display all inputs.
ON ............. If no input signal is present, skip that input.
* "SETTING NOW" will appear during the input search.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
23
OPTION1
1 / 3
:
RGB
:
AUTO
:
1080B
:
ON
:
OFF
ADJ.
EXIT
RETURN
or
Hide quick links:
Advertisement
Table of Contents
