Table of Contents
Advertisement
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting "SOFT FOCUS" to "2"
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the ▲ and ▼ buttons to select "LONG LIFE", then
press the MENU/ENTER button. The "LONG LIFE"
screen appears.
3. Use the ▲ and ▼ buttons to select "SOFT FOCUS".
4. Use the
and
buttons to select "2".
The mode switches as follows each time the
button is pressed:
→OFF ↔ 1 ↔ 2 ↔ 3 ↔ 4
LONG LIFE
PEAK BRIGHT
ORBITER
INVERSE
SOFT FOCUS
SEL.
ADJ.
Information
SOFT FOCUS settings
OFF ............ Turns the SOFT FOCUS function off.
1, 2, 3, 4 ..... Activates the SOFT FOCUS setting. The
higher numbers create a softer image.
or
:
AUTO
:
OFF
:
OFF
:
2
EXIT
RETURN
Setting the gray level for the sides of the screen
Use this procedure to set the gray level for the parts on the
screen on which nothing is displayed when the screen is
set to the 4:3 size.
Example: Adjusting the "GRAY LEVEL"
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the ▲ and ▼ buttons to select "GRAY LEVEL".
3. To adjust the "GRAY LEVEL"...
Use the
and
buttons to adjust the GRAY LEVEL.
PREVIOUS PAGE
PWR. MGT.
FILM MODE
LONG LIFE
GRAY LEVEL
S1/S2
NEXT PAGE
SEL.
Information
GRAY LEVEL settings
This adjusts the brightness of the black (the gray level)
for the sides of the screen.
The level can be adjusted from 0 to 15. The factory
setting is 2 (gray). This setting helps minimize uneven
phosphor aging.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Setting the screen size for S1/S2 video input
If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting the "S1/S2" to "AUTO"
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the ▲ and ▼ buttons to select "S1/S2".
3. Use the
and
buttons to select "AUTO".
The mode switches as follows each time the
button is pressed:
OFF ↔ AUTO
PREVIOUS PAGE
PWR. MGT.
FILM MODE
LONG LIFE
GRAY LEVEL
S1/S2
NEXT PAGE
SEL.
28
OPTION2
2 / 3
:
OFF
:
ON
:
2
:
OFF
ADJ.
EXIT
RETURN
OPTION2
2 / 3
:
OFF
:
ON
:
2
:
AUTO
ADJ.
EXIT
RETURN
or
Hide quick links:
Advertisement
Table of Contents
