Table of Contents
Advertisement
SYSTEM RESET
To reset the system and override the forty five (45) minute start delay:
1.
Press and hold the red controller reset button for two (2) to three (3)
seconds until both the green and red LEDs display a solid glow. Release
the button.
The reset button is located on the front left corner of the underside of the
controller box.
reset
button
2.
The green LED will flash rapidly for three (3) seconds, then the heat pump
will commence its heating start-up cycle. A series of 2 or 3 x green flashes
will commence.
37
COMMISSIONING
Advertisement
Table of Contents
