Table of Contents
Advertisement
18. Cable Tab – 551 Series: Remove the tab on the side of the electrical
entry to the heat pump module to accommodate the electrical conduit.
Pliers or tin snips may be required to remove the tab.
remove the tab on the side of the electrical entry to the heat pump module
19. Studs: Retrieve the three (3) studs from the kit and screw into the
three (3) threaded inserts on the side of the tank closest to the wall.
These studs will assist in aligning the heat pump module for connection to
the storage tank.
Step 18
Step 19
screw in studs into threaded inserts
25
HEAT PUMP AND TANK ASSEMBLY
Advertisement
Table of Contents
