Rheem MPi Series Installation Instructions Manual page 21

10. Cover Strip: (410 litre storage tank only) – Retrieve the length of rubber
cover strip from the kit supplied with the 410 storage tank.
Line up one end of the cover strip with one end of the heat pump

housing black top, fitting the strip over the lip of the housing, ensuring
the jacket is hard up against the lip of the heat pump housing.
The cover strip will hold the jacket in position.
Apply the cover strip along the full length of the lip of the heat pump

housing.
COVER STRIP
COVER
STRIP
HEAT PUMP
HOUSING
HEAT PUMP
HOUSING
COVER STRIP APPLICATION
Step 10
apply cover strip to heat pump housing
HEAT PUMP AND TANK ASSEMBLY
ASSEMBLY
DETAIL
COVER
STRIP
HEAT PUMP INTEGRATED 410 LITRE
21
SK6570-1 rev BD
1/5/13