To Delete All Values Stored In The Memory - Omron BP652CAN Instruction Manual

USING THE MEMORY fUNCTION
NOTES: • The date and time are alternately displayed with the measurement
values.
• Press the MEM button repeatedly to display the next values.
• Press and hold the MEM button to display the values faster.
3. Press the START/STOP button to turn the monitor off.

TO DELETE ALL VALUES STORED IN THE MEMORY

The values stored in the memory are deleted by User ID. You cannot partially delete
values stored in the memory. All values for the user you select will be deleted.
1. Select your User ID (A or B).
2. Press the MEM button to turn the monitor on.
3. While holding the MEM button, press the START/STOP button down for more than
5 seconds until the display appears as it does in the following illustration.
4. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after two minutes.
23