Pride Mobility SPARKY Owner's Manual page 7

Battery Set Configuration:
+ = Positive (Red) Terminal Post
- = Negative (Black) Terminal Post
Connect Red wire to Red Positive (+) Terminal Post.
Connect Black wire to Black Negative (-) Terminal Post.
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new
batteries. Always replace both batteries at the same time.
Pinch/Crush point created during assembly.
Do not place power chair in freewheel mode on a decline.
Do not place power chair in freewheel mode on an incline.
Do not remove anti-tip wheel.
No step. No standing. Keep off!
Battery charger for indoor use only.
Sparky
I I . S A F E T Y
www.pridemobility.com 7