Pride Mobility SPARKY Owner's Manual page 21

Power Chair Securement Points
The power chair may be equipped with four (4) tie-down
points for the purpose of securing the unoccupied power
chair during motor vehicle transport. Each tie-down point
is clearly labeled for this purpose.
To secure a power chair equipped with tie-down
points:
Always secure the power chair in a forward-facing
position in the vehicle.
Attach the four tie-down straps only to designated,
labeled transit securement points indicated by anchor
symbols on the power chair. See figures 9 and 10.
Tighten the straps to sufficiently remove all slack.
Never attach tie-downs to adjustable, moving, or
removable parts of the power chair such as armrests,
front riggings, and wheels.
Position the anchor points for the rear tie-down straps
directly behind the rear securement points on the power
chair. The front tie-down straps should be anchored to
floor points that are spaced wider than the power chair
to provide increased stability. See figure 10.
Figure 10. Unoccupied Transit System Securement Points
Sparky
I I I . Y O U R P O W E R C H A I R
MANDATORY! The power chair
should be used as indicated in
the manufacturer's
tions. If you have any ques-
tions about the proper use of
your power chair, contact your
Quantum Rehab Provider.
SECUREMENT
BRACKETS
instruc-
Figure 9. Transit System Securement Brackets
www.pridemobility.com
SECUREMENT
BRACKETS
FRONT
OF VEHICLE
21