Ricoh C226 Service Manual page 131

INSTALLATION PROCEDURE
7. Installing the Master Roll
(Type VT-II-M)
a. Attach a spool to each end of the
master roll.
b. Set the master roll in the machine.
NOTE: The vinyl side faces down.
c. Return the pressure release lever to
the original position.
d. Plug in the power cord and turn on
the main switch.
e. Press the Master Cut button.
f. Remove the cut master paper.
NOTE: Check that the master paper
is not bent or creased.
g. Close the upper cover and scanner
unit.
C226 3-8 SM